Before you start painting a colored wall white, consider the quality of the paint. When repainting a colored wall white, invest in a high-opacity paint. Acrylic, latex or silicone paints with high abrasion and stain resistance will work well. Pay attention to the abrasion resistance class of the paint – the higher the class, the better the quality of the product. Don’t forget to check parameters such as drying time or any additional paint properties such as antistatic or washability.
Preparing the wall for painting
Before painting, the wall should be thoroughly cleaned of dust, dirt and any residue from old wallpaper or adhesives. For walls with strong and intense colors, apply a priming coat of paint to make it easier to cover the colored surface with white paint. Priming the wall will allow the paint to adhere better and protect the surface from moisture. If there are any irregularities or holes in the wall, fill them with a suitable putty before applying the primer. When repainting a colored wall to white, it is often necessary to apply several coats of paint. After each coat, wait for the paint to dry thoroughly – this usually takes about 24 hours. Only when the first coat is completely dry can the next coat be applied. Remember that the more coats you apply, the better the final result. Carefully applied multiple coats will give a long-lasting and aesthetically pleasing result.
Using the right tools
Choosing the right tools for painting is key to achieving a professional result. Invest in a roller with the right hardness and texture to spread the paint evenly on the wall. Use a brush for corners and edges to avoid streaks and discoloration. Masking tape can be useful to maintain precision when painting. And don’t forget other accessories such as a ladder or paint stirrer. Use the wet paint technique to achieve an even effect on the wall. This involves applying successive strokes of paint to a surface that is not completely dry. It allows you to avoid visible edges between individual strokes. It is important to paint from top to bottom and then from left to right to ensure an even coat of paint. Also, remember to make sure the paint has the right consistency – paint that is too thin will run off the wall, and paint that is too thick will be difficult to apply.
Painting a dark wall white
Before you start painting, you need to prepare the wall properly. If there are any cavities in the wall, such as holes or scratches, fill them with putty and allow them to dry. Then, clean the wall of dust and dirt with a cloth soaked in soapy water. Sand the surface once the wall is dry to help the paint adhere. Protect the floor and furniture by covering them with painter’s film. For best results, apply a primer before applying the white paint. The primer will help bridge the color difference between the dark and white walls and provide better coverage. When choosing a primer, choose a product with high coverage and good adhesion. The primer should be applied evenly to the wall with a paint roller or brush. Once the primer is dry, you can apply the first coat of paint. It is important that you mix the paint thoroughly before use to ensure even distribution of the pigments. It should be applied evenly with a paint roller or brush. Once the first coat has been applied, allow the paint to dry – this usually takes a few hours, but can vary depending on the type of paint and weather conditions. For best coverage, apply a second coat of paint.